HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to clear NVRAM on HP ML110 G4?

 
SOLVED
Go to solution
RayWagner
Occasional Contributor

How to clear NVRAM on HP ML110 G4?

Hi!

 

My HP ML110 G4 server has problems. After the BIOS updating System Board LED indicator CR7 is RED indicating an error has occurred.  Fans Spin, No Video on the screen. I excluded from it all components: memory, RAID controller, ILO card, etc. But it didn't help.

 

Maybe will clearing NVRAM help me?

2 REPLIES
Marko71
Frequent Advisor

Re: How to clear NVRAM on HP ML110 G4?

Hi,

 

To clear system configuration, disconnect AC power and press the CMOS button (SW50 on motherboard).

 

Hope this helps.

 

Best regards

 

 

Mark

Suman_1978
HPE Pro
Solution

Re: How to clear NVRAM on HP ML110 G4?

Hi,

 

CR7 indicates a system error.  Clearing NVRAM may help.

Attached is a pic of system board with switch location.

 

Thank You!
I am a HP employee.