How to configure ILO

[christian_pitet]

Hi

I have a DL 20 gen 9 server. I have configured ILO with a static address. I cannot see it in the Network on my Windows machine. How to see it ? I would like also to use Remote Desktop to manage it.

Regards.

[Torsten.]

Did you configure ILO to use a shared network interface or dedicated?

[christian_pitet]

Hello Thorsten,

i have configured ILO with a shared network interface because there is no dedicated ILO port on this server.

Regards.

[Torsten.]

AFAIR you cannot contact ILO via network from the local machine if using a shared network (not via the same interface). Does it work from from a different PC?

[christian_pitet]

Hi

I am not sure i understand wll. I am using Shared Network port - LOM for ILO4 on this server. I cannot "see" this server from my remote windows machine on the network.

Regards

[Jimmy Vance]

The DL20 has 2 NIC ports, iLO is shared on port 1.  Becasue of the shared port you cannot access the iLO from the host OS and must connect to iLO from a different computer.   You also need to make sure you have the proper information setup in iLO for static address.  Was it working using DHCP and stopped when you changed to static?

[christian_pitet]

I have changed the cable to connect to port 1. I cannot see the server on my Windows network. I have never used DHCP and I am using static address. I have double checked the information for IP static address. I would like to connect to the server using Remote desktop connection form my windows machine but I cannot, there is a message saying it cannot reach the IP address of the server. I would like to connect using the remote desktop connection.

[Torsten.]

>> I would like to connect using the remote desktop connection.

This has nothing to do with ILO. You need to point to the windows OS IP address.

For ILO access you need to use a browser and oint to the ILO address.

[christian_pitet]

That is my mistake I thought ILO had to do with windows IP address..

How can I configure network setting on the server to be able to "see" the server on a windows network ? My goal is to be able to connect to the server and use remote desktop to use the server as if it was local.

[Torsten.]

Just setup an IP address for the windows OS, it must be different to the ILO address.