How to configure LUN on DL360 G7?

[Ronny Simonsen]

Hi!
I have a DL360 G7 with two disks in RAID1.

I need to create two LUNs for installing Novell OES2 Linux. I need to use NSS-filesystem and it is recommended to use its own LUN for NSS-filesystem(One LUN for SLES10 and one LUN for NSS).

The G7 is completely different from earlier series and i can't find a way to configure LUN.
How do i setup LUNs on HP DL360 G7?

[Sivaramakrishna_1 · Accepted solution]

Hi,

I hope you can create LUNs using ACU GUI, the same can be done by bootig the Smart Start CD.

Once creating the LUNs and restart the server and install the OS into first volume, later can can configure the second LUN with NSS filesystem.

[Jimmy Vance]

The ORCA (Option ROM Configuration for Arrays) utility that shows during POST via F8 only allows you to create the RAID level and a simple LUN. If you need to create multiple LUNS on the array, boot the system using the SmartStart CD and run ACU (Array Configuration Utility)

You can find more detail in the

HP Smart Array Controllers for HP ProLiant Servers User Guide
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01608507/c01608507.pdf