ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure LUN on DL360 G7?

SOLVED
Go to solution
Ronny Simonsen
Occasional Contributor

How to configure LUN on DL360 G7?

Hi!
I have a DL360 G7 with two disks in RAID1.

I need to create two LUNs for installing Novell OES2 Linux. I need to use NSS-filesystem and it is recommended to use its own LUN for NSS-filesystem(One LUN for SLES10 and one LUN for NSS).

The G7 is completely different from earlier series and i can't find a way to configure LUN.
How do i setup LUNs on HP DL360 G7?
2 REPLIES
Sivaramakrishna_1
Honored Contributor
Solution

Re: How to configure LUN on DL360 G7?

Hi,

I hope you can create LUNs using ACU GUI, the same can be done by bootig the Smart Start CD.

Once creating the LUNs and restart the server and install the OS into first volume, later can can configure the second LUN with NSS filesystem.

Jimmy Vance
HPE Pro

Re: How to configure LUN on DL360 G7?

The ORCA (Option ROM Configuration for Arrays) utility that shows during POST via F8 only allows you to create the RAID level and a simple LUN. If you need to create multiple LUNS on the array, boot the system using the SmartStart CD and run ACU (Array Configuration Utility)

You can find more detail in the

HP Smart Array Controllers for HP ProLiant Servers User Guide
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01608507/c01608507.pdf





__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!