ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure ilo on ML110 G6

abacabb
Occasional Contributor

How to configure ilo on ML110 G6

Does anyone know how to configure the ILO on the ProLiant ML110 G6? I tried searching for documents and was not successful.
5 REPLIES
Johan Guldmyr
Honored Contributor

Re: How to configure ilo on ML110 G6

Hey, on the G6 the integrated iLO is a HP "Lights-Out 100i".

More info about it can be found here: http://www.hp.com/go/lo100

Usually you configure this by pressing the right button at the right time during POST/boot of the server. Often it is F8.
Yaning.Wu
Occasional Advisor

Re: How to configure ilo on ML110 G6

When POST,press F10 to enter BIOS--Advanced---IPMI--LAN SETTINGS,Then you can set the IP address
Priyansha
Valued Contributor

Re: How to configure ilo on ML110 G6

Hi,

 

To configur iLO you can go through the following HP guided troubleshooting link :

Under Management and Monitorining u will find iLO :

http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3984625&lang=en&cc=us

Thank you,
Was the post useful? Click on the white KUDOS! Star.
For HP Guided Troubleshooting; www.hp.com/support/hpgt
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03283214
Lincy_Zachariah
Valued Contributor

Re: How to configure ilo on ML110 G6

Hi,

 

 

Steps to configure lights out 100 : Configuring network access: Through your server network connection, you can access the remote management CLP, verify POST (power-on self test) remotely, access the server through a web browser, and access the BIOS Setup Utility remotely. To configure network access: 1. Connect a standard Ethernet cable from the LO100 NICto a network jack. 2. Press the F10 key to access BIOS. 3. Obtain the DHCP IP address. o For ML110 G6: i. Press the right arrow → key to scroll to the Advanced tab, and then scroll down to IPMI. Press the Enter key. ii. Click LAN Settings, and then click Set IP Address Assignment to DHCP. Obtain the IP address from BIOS Setup Utility under Advanced/IPMI Configuration/LAN Configuration.

 

Click here for HP ProLiant Lights Out-100 User Guide

 

You can access HPGT to get step by step solution:
Clcik here for HOGT on HP Proliant ML110 G6
Select - Configuration and Setup --> HP Lights-Out 100 (LO100) Configuration

 

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02063205/c02063205.pdf

 

 

Thanks & regards,
I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details
______________________________________________________
Was the post useful? Say thanks by clicking the white KUDOS Star!

Re: How to configure ilo on ML110 G6

Hi, 

 

Step by step instructions to configure HP Lights-Out 100 (LO100) is available at below said link:

 

Guide: How to Configure HP Lights-Out 100 (LO100)

 

It may be helpful to you.

 

Regards

I am an HP Employee

Was this post useful? - You may click the KUDOS! star to say thank you.