HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure snmp on RHEL3 U4 with DL380 G5

 
Gryan_1
Occasional Advisor

How to configure snmp on RHEL3 U4 with DL380 G5

Hi, expert

I have DL380 G5 with RHEL3 U4 installed. Today, I tried to use JP1/NNM manager to monitor it but I failed to do that because snmpwalk -p -c system did show me timeout. I also have the same server installed with RHEL3 U4, I found another server has net-snmp-cma,* installed but the server did not which is using OS default net-snmp. Any idear about HP and JP1/NNM monitor.
1 REPLY
Taifur
Respected Contributor

Re: How to configure snmp on RHEL3 U4 with DL380 G5

HI
Check below link for details as follows,

http://www.chinalinuxpub.com/doc/www.siliconvalleyccie.com/linux-hn/mrtg.htm

Rgds//
Taifur