HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to create RAID with P800 contr?

 
biokovo_1
Occasional Advisor

How to create RAID with P800 contr?

I have DL380G6 with 6 SAS drives and embedded P400i contr., and with P800 because P800 is supported from SCO Unix. I wan't to create RAID10 with P800, but don't know how to enter in conf. menu for P800 contr?! If I press F8 conf. then conf menu for P400i is apear.
Thanks
2 REPLIES

Re: How to create RAID with P800 contr?

Hi,

-F9 enter the RBSU.
-Boot Controller Order > HP Smart Array P800 -Controller is the first set.
-save and exit And then try again.

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Regards
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
biokovo_1
Occasional Advisor

Re: How to create RAID with P800 contr?

Thanks
I already set P800 to first boot controller.
After initializing P400i there is option to press F8, and than go initializing P800 but after that there is no option to press F8 or something that.