ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to display ILO firmware version

SOLVED
Go to solution
Dag A.
Frequent Advisor

How to display ILO firmware version

Hi.

How can I tell which ILO firmware version is on a Proliant DL380 G6 server?

It is not shown on the screen on startup.

I am not using ILO for anything, but a HP advisory (no c01802766) says that the ILO version must be 1.82 or newer to avoid a problem.
9 REPLIES
Trygve Henriksen
Respected Contributor

Re: How to display ILO firmware version

Download and run the latest Proliant Support Pack?
Johan Guldmyr
Honored Contributor

Re: How to display ILO firmware version

Doesn't it say somewhere in the iLO interface?
Torsten.
Acclaimed Contributor

Re: How to display ILO firmware version

You see this during server boot up and from iLO web page.

Currently there is a version 2.04.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Cederberg
Honored Contributor

Re: How to display ILO firmware version

On most G6 servers with fairly new BIOS versions the option rom is not shown during POST (ILO, Raid, network, Fiber HBA) unless you press any key when prompted "If you want to see option rom press any key"

or

You should be able to See the ilo version from System Management Homepage

Managament Processor > Integrated Lights-out 2>
Torsten.
Acclaimed Contributor

Re: How to display ILO firmware version

Well, to be more specific - Currently there is a version 2.04 for iLO2 on proliants. Other iLOs (RILO and iLO3 or iLO on Integrites have other, non compatible versions).

As said, you can connect to the iLO via browser (from SMH or directly) and you will see the version.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dag A.
Frequent Advisor

Re: How to display ILO firmware version

Hi,
Thanks for your answers.

Stupid question perhaps, but:

What is the address of the System Management Homepage ? Can I open it in IE on the Server?

Alternatively: Which address should I enter in the browser of a PC connected to the ILO network port, in order to open the ILO interface?

Torsten.
Acclaimed Contributor
Solution

Re: How to display ILO firmware version

The iLO has an own IP address (visible from SMH too).

The SMH has

http://server_ip:2301

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sathish Arunachalam
Occasional Visitor

Re: How to display ILO firmware version

http://127.0.0.1:2301 Enter this address in IE on the Server.
u can visable the SMHP.
Dag A.
Frequent Advisor

Re: How to display ILO firmware version

Found it in the Management Homepage

Thanks for your help!