ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to do arrange new install Cage SCSI ID for DL380?

YANG PING CHIEN
Occasional Contributor

How to do arrange new install Cage SCSI ID for DL380?

I have one DL380, it's have a BIOS Warning message. I hope anyone can tell me how to do fix it.

Thanks.

1777 - Slot 0 Drive Array - Proliant Storage Enclosure Problem Detected.

SCSI Port 1 : I/O Board Responding at Wrong SCSI ID.

Check Cables and Storage System I/O Board(s)

1 REPLY
Vijay_44
Honored Contributor

Re: How to do arrange new install Cage SCSI ID for DL380?

Did this happen after added the two bay drive cage to the DL380? I would first check teh cabling:

Basically you need to connect a point-to-point SCSI cable from the controller to bottom connector the 2 bay drive cage and connect another point-to-point SCSI cable from the top of the 2 bay drive cage to the main 4 bay cage. There is also a additional signal cable between the two cages.
There’s your problem!!! This thing is set to EVIL!