HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to enable SATA suport on ML110

 
rascalli
Occasional Visitor

How to enable SATA suport on ML110

I found sata connectors on my system (339042-421)

BUt some how when I plugin a SATA disk & go to the BIOS, I cannot select to enable SATA.

Any idea ?

Also I want to update the BIOS , but I am on VISTA X64 , so there is no ROM available , any help would be appreciated

3 REPLIES
KarloChacon
Honored Contributor

Re: How to enable SATA suport on ML110

hi

339042-421 - is that number for a ml110 g1?
I mean which generation

usually you go to advance options - chipset control and you will find SATA options
Didn't your momma teach you to say thanks!
rascalli
Occasional Visitor

Re: How to enable SATA suport on ML110

yes I guess it's a G1 , it's an older one

Well if I go into bios you see the option SATA , but it is grey .. so it can not be used
KarloChacon
Honored Contributor

Re: How to enable SATA suport on ML110

hi

I just realized this
SATA option is disable by design in those SCSI and ATA models

there are 3 ml110 g1 models

HP Single Channel Ultra320 SCSI Adapter (SCSI Models)
Integrated Dual Channel Ultra ATA-133 IDE (ATA Models)
4 port SATA RAID controller (SATA Model)

in your case you have a ATA model (339042-421)

so if you want SATA in your server you need either get a SATA model or get this option SATA PCI Controller Card: 367877-001 (4 port SATA controller)

regards
Didn't your momma teach you to say thanks!