HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to execute ROM Update Utility on ML370 G1?

 
Tom Cathers
Occasional Visitor

How to execute ROM Update Utility on ML370 G1?

I have a ML370 g1 with Ultra 3 disks that the SA5300 is calling out for firmware updates. How do I apply the latest firmware updates?

It seems to me that I must use the ROM Update Utility available on Smart Start 6.x but I can't boot this model from that can I? What is the alternative?

Thanks

 

 

P.S. This thread has been moved from Disk to ProLiant Servers (ML,DL,SL). - Hp forum Moderator

2 REPLIES
Rob Buxton
Honored Contributor

Re: How to execute ROM Update Utility on ML370 G1?

If you've downloaded the Softpaq, the next step is creating the 15 Floppy Disks!.
I believe that you can boot from the first, so just Boot the ML370 from that and then, hopefully, follow the instructions.
Tom Cathers
Occasional Visitor

Re: How to execute ROM Update Utility on ML370 G1?

re: softpaq

I haven't seen a softpaq for disks distributed via HP's site, only from SS5.x and before. The only updates that I have seen lately are Offline Updates.

Reading between the lines, can I boot the first softpaq disk and then use my Offline Update disk? I hope that is more then a dream...