HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to identify old RAID-Controller in ML370

 
SOLVED
Go to solution
Markus Pöstinger
Occasional Contributor

How to identify old RAID-Controller in ML370

Hi.

I have got here an old Compaq Proliant ML370. It is in a white case, so I think it's a G1. It also has got some additional RAID-Controller inside, but I don't know which.

Now I'd like to install Windows 2000 on it. I obtained the SmartStart 5.5 - CD from this site. Is it all I need to get the RAID-controller working fine or do I need some additional drivers?
1 REPLY
Rob Leadbeater
Honored Contributor
Solution

Re: How to identify old RAID-Controller in ML370

Hi,

Assuming that the RAID-Controller is a Compaq/HP model, then you should be fine with just the SmartStart 5.5 CD.

Regards,
Rob