ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to install WinNT4 on ML370 with SmartArray 5302 controller

markcowong
Occasional Visitor

How to install WinNT4 on ML370 with SmartArray 5302 controller

How to install WinNT4 on ML370 with SmartArray 5302 controller? I had use the driver of "HP ProLiant Smart Array 5x and 6x Controller Driver for Windows NT 4.0" (4.30.2.32, cp002890.exe), but still cannot see the RAID partition. Of couse, I had config my RAID to have 5 disk partition.... anyone can help??? Thanks.
2 REPLIES
kcpant
Trusted Contributor

Re: How to install WinNT4 on ML370 with SmartArray 5302 controller

hi,

http://h18007.www1.hp.com/support/files/storage/us/locate/7_1237.html


go to the above link, download the driver diskette , press F6 when propted at the time of setup and install the driver through this diskette.( note: this diskette is for 5302/32 card, if you have a different card, please search the approriate driver for the same).

You can do the NT installation by using smartstart cd also. get the Latest CD of Smartstart supported by your server ( I believe SS 5.4 ( may be higher also) ), and install through it.

hope it will solve the problem.
PreSales Specialist
Prashant (I am Back)
Honored Contributor

Re: How to install WinNT4 on ML370 with SmartArray 5302 controller

Hi,

What i can suggest if possibel use smart start cd use the ACU then check for
infomraiton about radi on server.

Regards,
Prashant S.
Nothing is impossible