Use something like a paper clip.
Power off the server, toggle the switch, power on and wait for the message. Power off, toggle back and boot up.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
Hello,
Please do refer the below
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c01726862
Please do use a pin/paper clip/needle to toggle the switch.
Thanks.
I work for HPE
