ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to reassign disk 0 and disk 1 on a DL380 G5

deleted280207
Occasional Contributor

How to reassign disk 0 and disk 1 on a DL380 G5

We have two identical servers each equipped with a P400 Raid Controller having 4*72 GB disks and a P800 Controller having 12*146GB disks.
Due to use of a clustering software, I will like to have the servers disks to be assigned in the Windows 2003 ServerR2 Disk Management as disk 0 for the P400 and disk 1 for the P800. How can I change this assignment.
The P400 controller is in slot 1 and set as the boot controller, but do show up as disk 1.
(it does when the there are only one logical drive established on the P400, when a second logical drive is created on the P800, the P400 disks changes from being disk 0 to disk 1 )
I have attached a screendump showing the configuration.'

I have upgraded the controllers and the server firmware to latest versions.

Can anyone possibly help me on this.

Thanks in advance
Sten Andreasen
1 REPLY
Vandba2000
Occasional Visitor

Re: How to reassign disk 0 and disk 1 on a DL380 G5

Sten,

I got the same problem like yours. Please share share any information when you got the solution.

Thanks,

Van