HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

How to reconnect HP DL380pG8 to HP MSA2040

Occasional Contributor

How to reconnect HP DL380pG8 to HP MSA2040

Hi All,

Let me give you a brief rundown.

I have a Dl380pG8 which had Win 2008 R2 and it was upgraded to Win 2016. Before the upgrade, I had 3 partitions. But after the upgrade, I am left with two. Upon checking, the DL380p is connected to a HP MSA 2040. Additionally during the Win 2016 installation; all three partitions can be seen.

The current configuration of the MSA 2040 was set by a previous employee who has left the company.

Physically the setup of both devices are :

DL 380p connected to switch.

Switch connected to MSA 2040.

How do i reconnect back to the MSA2040 ? Is there any specific software or driver I need to get ? I am unable to find any articles on reconnecting

Jimmy Vance

Re: How to reconnect HP DL380pG8 to HP MSA2040

Is it using fibre channel HBA's, or iSCSI?  Here is the user guide https://support.hpe.com/hpsc/doc/public/display?docId=c03792322

No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Contributor

Re: How to reconnect HP DL380pG8 to HP MSA2040

it is using iscsi