HPE Community
ProLiant Servers (ML,DL,SL)
1753945 Members
8251 Online
108811 Solutions
New Discussion

How to refresh and update HP Proliant DL360 G7?

 
tronic72
Occasional Contributor

‎03-30-2015 02:16 AM

‎03-30-2015 02:16 AM

How to refresh and update HP Proliant DL360 G7?

Hi,

 

I have inherrited about a dozen HP Proliant DL360 G7 servers . How can I test the hardware on them (run hardware diagnostics)?

 

Also what is the best method to update their HP bios and utilities? I've not used HP servers before so sorry for the newbie questions.

 

Mark

 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎03-30-2015 02:31 AM

‎03-30-2015 02:31 AM

Re: How to refresh and update HP Proliant DL360 G7?

Wait a few days until SPP 2015.03 is available, download and create a USB device from the ISO. Then you can boot from, update firmware and test your hardware-

 

http://www.hp.com/go/spp


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.