ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to remove processor on G3 DL380?

 
Stephen Lisle
Occasional Visitor

How to remove processor on G3 DL380?

I need to remove the second processor for memory requirements, but it will not even get to POST when the second processor is removed and there is an amber light on the top LED, is there a jumper I need to move in order for the server to utilize just the one processor?

Thanks,
2 REPLIES
Rajashekar Chintakunta
Honored Contributor

Re: How to remove processor on G3 DL380?

Hi Stephen,

There is no jumper settings for this. When the second processor is removed, remove the PPM 2 from the server. Restart and check. Still the top led is amber, check on the systemboard if there is any component has a amber led lit up. Reseat the component and check. Reseat Memory, CPU and PPM and check.

Refer the Service and Maintenance Guide:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00065010/c00065010.pdf

Regards,
Raj.
Stephen Lisle
Occasional Visitor

Re: How to remove processor on G3 DL380?

Thanks, that worked!