ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to replace failed drive in RAID 50 array in HP DL380 G7

Derthy
Occasional Visitor

How to replace failed drive in RAID 50 array in HP DL380 G7

Hello,
I have a HP DL380 G7 with 8 drives of 300 BG. A RAID 50 is configure on it and one drive has failed. I want to replace that drive. I tried to do that by removing the bad one and just adding the new and put on the server. But the server doesn't load the OS at all. And when I do a rollback, the server can start normaly, while led of the disk in blinking to the red. 

 

Please, could someone help me?

 

 

P.S. This thread has been moved from Disk Array to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

1 REPLY
Suman_1978
HPE Pro

Re: How to replace failed drive in RAID 50 array in HP DL380 G7

Hi,

 

Run the Array Diagnostic utility and see if more than one drive has failed.

There could be multiple drive failures.

 

Thank You!
I am a HP employee.

Useful Links for ProLiant Servers