HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to setup 2nd CPU in DL380G2

 
Ayman Altounji
Valued Contributor

How to setup 2nd CPU in DL380G2

I have a DL380G2 with Windows NT 4.0 Server (service pack 4) and i want to add a new processor.I try to setup it with Smartstart 5.3 or 4.9 but i can not find in CD:/CPQSUPSW\NTCSP/SETUP.exe anything about 2nd CPU or HAL.
After that i try from BIOS to change some advance options in ASPI but after that the NT Kernel did not start normally.
Please write me a solution...
2 REPLIES
Mark Cloutier
Respected Contributor

Re: How to setup 2nd CPU in DL380G2

If this did not work with SS4.9 you will have top upgrade the HAL the Microsoft way., Manually.
We are here for a good time, not a long time!
Ayman Altounji
Valued Contributor

Re: How to setup 2nd CPU in DL380G2

hello.
in the nt ressource kit there is an utility called "uptomp", which does the trick for nt.
by the way, you really should consider upgrading to nt-sp6a.
bye.