How to setup dedicated IRQ on PCI slots? ML150 G3

[Slanj]

Hi!

I am using ML150 G3 with Asterisk PBX and Digium telephony cards. These cards doesn't work good when they share IRQ.

So I need to assign dedicated IRQ on each PCI slot. How can I do this on my server? I didn't find this option in bios. Plese, help.

[ess]

hi
you can in environment setup by impact F9 and change of IRQ in slot.

[Slanj]

Thanx

When should I press F9? When system starts - it's written to press F10 to login system setup, but there I cannot find how to setup IRQ.

[KarloChacon]

hi

it is F10 you will see the option and you can into BIOS and look for IRQ

I am not sure if that BIOS has that option to change IRQ

regards

[Slanj]

I cann't find where are IRQ options in bios on F10.
I updated bios to the last version, but it changed nothing.

[Blazhev_1]

Hi,

according to the maintenance and service guide :

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00714207/c00714207.pdf

there is no such option.

Further this cards are not officially supported from the server, maybe because of such(and other) conflicts...

Regards

[SC Johnson]

Assuming that you are using approved hardware but wish to ensure there are no shared interrupts how does one change the interrupts being used by the integrated components?