ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to setup dedicated IRQ on PCI slots? ML150 G3

Slanj
Occasional Visitor

How to setup dedicated IRQ on PCI slots? ML150 G3

Hi!

I am using ML150 G3 with Asterisk PBX and Digium telephony cards. These cards doesn't work good when they share IRQ.

So I need to assign dedicated IRQ on each PCI slot. How can I do this on my server? I didn't find this option in bios. Plese, help.
6 REPLIES
ess
Super Advisor

Re: How to setup dedicated IRQ on PCI slots? ML150 G3

hi
you can in environment setup by impact F9 and change of IRQ in slot.
Slanj
Occasional Visitor

Re: How to setup dedicated IRQ on PCI slots? ML150 G3

Thanx

When should I press F9? When system starts - it's written to press F10 to login system setup, but there I cannot find how to setup IRQ.
KarloChacon
Honored Contributor

Re: How to setup dedicated IRQ on PCI slots? ML150 G3

hi

it is F10 you will see the option and you can into BIOS and look for IRQ

I am not sure if that BIOS has that option to change IRQ

regards
Didn't your momma teach you to say thanks!
Slanj
Occasional Visitor

Re: How to setup dedicated IRQ on PCI slots? ML150 G3

I cann't find where are IRQ options in bios on F10.
I updated bios to the last version, but it changed nothing.
Blazhev_1
Honored Contributor

Re: How to setup dedicated IRQ on PCI slots? ML150 G3

Hi,

according to the maintenance and service guide :

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00714207/c00714207.pdf

there is no such option.

Further this cards are not officially supported from the server, maybe because of such(and other) conflicts...

Regards
SC Johnson
Occasional Contributor

Re: How to setup dedicated IRQ on PCI slots? ML150 G3

Assuming that you are using approved hardware but wish to ensure there are no shared interrupts how does one change the interrupts being used by the integrated components?