ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

How to setup the ILO port on my DL360 G6 server for openstack

saltlake
Occasional Visitor

How to setup the ILO port on my DL360 G6 server for openstack

Hi Experts,

I have a DL360 G6 server (as labelled on the front). This is the first time I am working on this server.

I have Ybuntu 14.x installed on this server

 

My goal was to have this server setup as an Openstack node. While I was able to get PXE boot to work with manual intervention. I am unable to figure ut what the "POwer Type setting should be for this server when setting up the Maas configuration parameter.

 

So after failing a couple of things I realized I think I should get the ILO2 port (on the back of this server connected and configured. Please suggest how to make this port work and configured so that I may be able to remotely control this server.

 

Thank you

Regards

saltlake

 

P.S. Your timely help will be very very very appreciated!!

4 REPLIES
omnix-mm
Advisor

Re: How to setup the ILO port on my DL360 G6 server for openstack

Hi,

 

You can iLo setup, the first time SmartStart CD booting.

http://www.serverhead.com/restore-hp-ilo-factory-defaults-hp-smartstart-cd/
1. Boot your HP Server using HP SmartStart CD.
2. Once SmartStart CD is loaded, click on Maintenance button (check screenshot).

Suman_1978
HPE Pro

Re: How to setup the ILO port on my DL360 G6 server for openstack

Hi,

 

Couple of links on How to Configure iLO?

 

http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c03489934
http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c03505928

 

iLO 3 User Guide, refer to page# 25 (Configuring iLO)

http://h10032.www1.hp.com/ctg/Manual/c02774507

 

 

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

 

Self Solve Options for ProLiant Servers

mbchen77
Occasional Visitor

Re: How to setup the ILO port on my DL360 G6 server for openstack

Hi experts ,

Can you show me how  i can get into the iLo2 of HP380G6 Server ?

i just can't find out the way ,

really appreciate for your help !!!

 

Best regards

Marlboro

Torsten.
Acclaimed Contributor

Re: How to setup the ILO port on my DL360 G6 server for openstack

Power on the server.

During POST you see the ILO line, press F8 to go into the config tool.

Set IP address and credentials, then you can point your browser to ILO.

G6 servers have ILO2.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!