HPE Community
ProLiant Servers (ML,DL,SL)
1753772 Members
4910 Online
108799 Solutions
New Discussion юеВ

Re: How to syncronize a RAID 1 on a HP 8 INTERNAL PORT SAS 64/133 PCI-X RAID HOST BUS

 
Cron
Frequent Advisor

тАО06-06-2011 08:24 AM

тАО06-06-2011 08:24 AM

How to syncronize a RAID 1 on a HP 8 INTERNAL PORT SAS 64/133 PCI-X RAID HOST BUS

Hi guys!

I have this HP 8 INTERNAL PORT SAS 64/133 PCI-X RAID HOST BUS ADAPTER, one of the System HDDs configured as RAID 1 failed.

I got the new HDD and installed it but the RAID 1 doesn't syncronize automatically.

Do you know how to resynconize it?

Thanks,

Javier
0 Kudos
Reply
4 REPLIES 4
Torsten.
Acclaimed Contributor

тАО06-06-2011 09:24 AM

тАО06-06-2011 09:24 AM

Re: How to syncronize a RAID 1 on a HP 8 INTERNAL PORT SAS 64/133 PCI-X RAID HOST BUS

Can you tell the server model and OS?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Cron
Frequent Advisor

тАО06-06-2011 10:16 AM

тАО06-06-2011 10:16 AM

Re: How to syncronize a RAID 1 on a HP 8 INTERNAL PORT SAS 64/133 PCI-X RAID HOST BUS

Proliant DL140 G3.
Windows Server 2003.
Windows Server 2008.
0 Kudos
Reply
hvhari
Esteemed Contributor

тАО06-06-2011 09:15 PM

тАО06-06-2011 09:15 PM

Re: How to syncronize a RAID 1 on a HP 8 INTERNAL PORT SAS 64/133 PCI-X RAID HOST BUS

Re-build should happen automatically. It is possible that there was a spare configured and that has already taken over the place of failed disk. Then the new disk will be hotspare. You can verify the status with ADU (Array Diagnostic Utility) which comes part of HP tools for this raid card.
Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
0 Kudos
Reply
Cron
Frequent Advisor

тАО06-07-2011 03:15 PM

тАО06-07-2011 03:15 PM

Re: How to syncronize a RAID 1 on a HP 8 INTERNAL PORT SAS 64/133 PCI-X RAID HOST BUS

Rebuild is not automatic in this controller model, in fact there is not an utility like ACU or ADU for monitoring and diagnosing this model.

That's the problem.

Thanks,

Javier
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.