ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Hp DL 180g6 integr. network NT362i(dual port) card low speeds

lagbeast
Occasional Contributor

Hp DL 180g6 integr. network NT362i(dual port) card low speeds

Hp DL 180g6, last bios, last updates (SPP 2014), network card HP NT362i NIC itself is switched to (1) 10 MB per second and (2)100 MB per second. (autodetection speed).

If you choose the speed manually, the network cable is not connected. one pont only 10mb(DF), one port 100mb (FD)

Network cards are working properly, only low speed.
The test (SPP Diag)is fully PASS.

 

update firmware - does not help.

 

what should I do?

 

may bee i can downgrate firmware?

 

p.s.
may bee you write me part number nt 362i internal DP module for replace.

1 REPLY
lightman
Advisor

Re: Hp DL 180g6 integr. network NT362i(dual port) card low speeds

Hello

I have the exact same server and is everything onboard, you cannot replace anything :(

 

My guess is that your NICs have a toasted transformer/transceiver.

since gigabit link requires 4 twisted pairs, but 100 and 10Mbps only 2 twisted pairs, is safe to assume that one (or both) of the pairs used for gigabit have a damaged transformer / transceiver.

 

now, both have the same behavior?

one is stuck at 10mb and the other at 100mb? always the exact same combination?

did you tested connecting it to a different switch with a different CAT6 patch? (I know, obvious, but sometimes, the most obvious one, is the one that we even didin't think to test, been there, done that hehe).

 

did you test it with another OS? (win/lnx) same exact behavior on both?.