cancel
Showing results for 
Search instead for 
Did you mean: 

Hp ML110 G5

 
PatelBhaumik
Occasional Visitor

Hp ML110 G5

Hi,

 

I have HP ML110 G5 Server & i attched 2x2TB HDD in Server But it's shown Only 1

How i used Both HDD in Server insted of 1???

 

Thank You

Bhaumik Patel

2 REPLIES
hpkasabbagh
Frequent Advisor

Re: Hp ML110 G5

Hello,

Wich Os is installed and raid configuration?

Please share With us an ADU report and the HDD spare part.

Sincerly
Jimmy Vance
HPE Pro

Re: Hp ML110 G5


hpkasabbagh wrote:
Hello,

Wich Os is installed and raid configuration?

Please share With us an ADU report and the HDD spare part.

Sincerly

Unless this system has an added HP Smart Array controller you cannot get an ADU report from the embedded SATA controller.

 

In this case I'd suspect there isn't a sata cable from the drive down to the system board.  

 

If this system does have a Smart Array controller, there is a special 4 port SATA adapter required to connect the SATA cables from the drives to the single connector on the Smart Array. 

 

In either case each drive has it's own cable to the controller

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!