ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Hp Prolinat ML 330

 
Buechel
Occasional Visitor

Hp Prolinat ML 330

I have a Adaptec 2930 CU interface to install in the Server but i have only 4 modern 64 Bit PCI slots. the Adabtec is a interface card for 5 Volts. What can i do?
Bjoern Buechel
3 REPLIES
Prashant (I am Back)
Honored Contributor

Re: Hp Prolinat ML 330

Hi,

Sorry to Dissapoint you but.

The ProLiant DL320 has a single 64-bit/33MHz PCI slot (3.3V) and is the only ProLiant server with such as a slot.

If you can go for this
64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter :: 154457-B21
Wide-Ultra SCSI-3 SCSI Adapter :: 272514-001

Regards,
Prashant S.

Nothing is impossible
Buechel
Occasional Visitor

Re: Hp Prolinat ML 330

Thanks for this information. It is not possible to install another adapeter. The reason is we have a software they only support the adaptec 2930 board.
Prashant (I am Back)
Honored Contributor

Re: Hp Prolinat ML 330

Hi,

As per the specs nothing i can suggest, in this case. But have tried to install the same card. If yes then what is the outcome for same.

Regards,
Prashant S.
Nothing is impossible