ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HpCISSs2 Error 129 on ML110 with E200/128

SOLVED
Go to solution
Juan_huayane
Occasional Visitor

HpCISSs2 Error 129 on ML110 with E200/128

Hi there,

we use a ML110G5 with an E200/128 Controller running SBS2003. Patch Level and Drivers are up to date.
Since two weeks the integrated SBS2003 Backup fails, while the error log states a 129 error from HpCISSs2 (reset to device \Device\RaidPort0 was issued), followed by an Error 11 from disk (controller error on \Device\Harddisk0\DR0). These Errors only occur during backup hours. Backup target is a external USB HDD.
Im a little bit helpless on this, any ideas?
Greetings, Juan Carlos

3 REPLIES
Suman_1978
HPE Pro
Solution

Re: HpCISSs2 Error 129 on ML110 with E200/128

Hi,

 

These Event ID could occur due to heavy IO.

I would suggest updating the controller firmware and or driver.

Juan_huayane
Occasional Visitor

Re: HpCISSs2 Error 129 on ML110 with E200/128

Sorry

I updated but still follow the errror

csk73
Occasional Advisor

Re: HpCISSs2 Error 129 on ML110 with E200/128

Hi, I'm having a similar error, I've found this advisory:

h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03097038&lang=en&cc=us&taskId=101&prodSeriesId=1157688&prodTypeId=329290