ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Hyper-V Bios settings DL380 G6

RichTea1973
Occasional Contributor

Hyper-V Bios settings DL380 G6

Hi All,

 

Have been looking for the best/required settings for the BIOS prior to installing Hyper-V. The idea is to drop the server only once prior to install.

 

Can anyone oblige on this.

 

Kind Regards

 

Richard

2 REPLIES
waaronb
Respected Contributor

Re: Hyper-V Bios settings DL380 G6

I don't have a server in front of me right now, but I'm pretty sure the DL380 G6 has those options enabled by default. They're in the processor options.

Here's a link to the RBSU guide:
http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c00191707-18.pdf

Intel VT should be enabled by default, and Intel VT-d which is also enabled by default.
Sbrown
Valued Contributor

Re: Hyper-V Bios settings DL380 G6

I'd serious consider disabling all unnecessary Ports - and setting all power settings to disabled. AKA run all at MAX,MAX,MAX speed for stability with G6/G7 servers!