ProLiant Servers (ML,DL,SL)
1748216 Members
3368 Online
108759 Solutions
New Discussion юеВ

I Can't Boot From the IDE Controller only SSCI

 
Andre Lindo
New Member

I Can't Boot From the IDE Controller only SSCI

the machine is proliant ml330 g3 bios version 09/01/05.
i can only boot from the ssci, inside the boot controller option i only can change order 1 and 3 but the ide is in order 2 where the problem is.
3 REPLIES 3
predrag81
Valued Contributor

Re: I Can't Boot From the IDE Controller only SSCI

Lindo,

i have same "problem" two years ago and you don't trying to boot from ide disk anymore because it's not posible.
Explain is that IDE controller is only support controller on this machine for optical device.

It's my explanation, maybe i wrong!

Karlo?

KR,
Predrag
KarloChacon
Honored Contributor

Re: I Can't Boot From the IDE Controller only SSCI

hi

why my name is in your answer predrag81????

OK jeje

well the only thing that comes to my mind is since there are 2 ml330 g3 models
IDE (ATA) and SCSI

and you mention SCSI I would say SCSI can boot from IDE

bye
Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: I Can't Boot From the IDE Controller only SSCI

I meant

Cannot from from IDE
Didn't your momma teach you to say thanks!