HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

I am using ML 370 G3 Server ..

 
SOLVED
Go to solution
xam
Occasional Advisor

I am using ML 370 G3 Server ..

can anyone tell me the bus speed of the onboard network card to the mother board??


Thanks
5 REPLIES
Solution

Re: I am using ML 370 G3 Server ..

Hi,

The onboard nic is a 64-bit/133MHz device that runs at 100MHz, which is the speed of the PCI-X bus.

Cheers.
Joseph Loo
Honored Contributor

Re: I am using ML 370 G3 Server ..

hi,

i think it is a NC7781, refer to detail reference:

http://h18004.www1.hp.com/products/quickspecs/11810_div/11810_div.html

and brief reference:

http://h18004.www1.hp.com/products/servers/networking/index.html

and if you need more on this server:

http://h18004.www1.hp.com/products/servers/proliantml370/index.html

regards
what you do not see does not mean you should not believe
xam
Occasional Advisor

Re: I am using ML 370 G3 Server ..

thanks.
Joseph Loo
Honored Contributor

Re: I am using ML 370 G3 Server ..

hi,

since you are a newbie, let me inroduce you to the point system:

http://forums1.itrc.hp.com/service/forums/helptips.do?#28

it is a "ITRC Forum" token of appreciation.

regards.
what you do not see does not mean you should not believe

Re: I am using ML 370 G3 Server ..

Hi,

It is correct that it is a NC7781,however like I said it runs at 100MHz,which is the speed of the PCI-X bus.

Cheers.