cancel
Showing results for 
Search instead for 
Did you mean: 

I need help

 
Alejandro Muñoz
Occasional Contributor

I need help

i had one server proliant ml370 with 2 scsii disk and i don´t see the option for raid 1 where is this
4 REPLIES
SIVAKUMAR.P
Frequent Advisor

Re: I need help

Hi Alejandro Muñoz ,

If you have install HP ProLiant Array Configuration Utility for Windows then you can able to run the utility and see raid status ( RAID0 OR RAID1(MIRRORING)).

IF YOU NOT INSTALLED HERE I MENTION THE ULR PATH, CAN U DOWNLOAD AND INSTALL.

http://h18023.www1.hp.com/support/files/server/us/download/22911.html

Thanks and Regards
Shiva.P
24/7 SUPPORT Mobile.No:919841509428
Andrzej Kowalik
Honored Contributor

Re: I need help

What kind of array controller do you have?
On most model you can press F8 during POST process to access RBSU (when array controller scan disks).
You can also boot from SmartStart CD and use Array Confoguration Utility.
If you don't have array controller, you can mirror your disks from OS.
regards,
Andrzej

Re: I need help

Double check that the model of server is supplied with an array controller.

The high performance models are shipped with the Smart 6402 controller, but the standard models have as single U320 SCSI card.

If the 6502 (or other array controller) is installed the array based setup utility can be used. If not raid will need to be setup via the operating system.
Caster Troy
Regular Advisor

Re: I need help

Try installing the Proliant Support Pack and then look for the Array Configuration Utility.
Evil Has Its Winning Ways