cancel
Showing results for 
Search instead for 
Did you mean: 

ILO Board

FRED JEWELL JR
Occasional Advisor

ILO Board

Will resetting the jumper on the ILO in a DL360 G3 clear the password. And is the jumper marked as a reset jumper.
1 REPLY
Colin Waitt
Occasional Contributor

Re: ILO Board

Had experience of this
If you go to the motherboard there will be a block of switches called the system maintenance (SW2) switch, if you locate S1 should be marked as the ILO override. With the machine powered down - set the switch to be "on" this will then override the security, log in via your webbrowser and it shouldn't ask you for a password, once in you can then set your password, log out and then reset the switch to be "off" log in again with your new password and it should be OK