cancel
Showing results for 
Search instead for 
Did you mean: 

ILO Setup

SOLVED
Go to solution
Tim Shuman
Occasional Visitor

ILO Setup

This should be an easy one, our company server has been up and running fine for a year but whoever set it up never plugged in the ILO. I ran a new cat 5, plugged it in, I see activity on the switch, I just need to know how to find the IP to log into the ILO console. It isn't listed in Network Adaptors.
3 REPLIES
Igor Karasik
Honored Contributor
Solution

Re: ILO Setup

If you have DHCP your ILO will receive IP address from DHCP, check your DHCP server for something like "ilo-server-serial-number".
If you don't have DHCP read pages 18-19 of ILO manual to set IP.
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00209014/c00209014.pdf
After you have IP open browser and write ILO IP address. Default login is "Administrator"
(capital A - very important !), the password you can find on the label on the server top.
See http://h18004.www1.hp.com/products/servers/management/ilo/questionsanswers.html#a5
if you don't have password
Igor Karasik
Honored Contributor
Tim Shuman
Occasional Visitor

Re: ILO Setup

Thanks IGOR! We run Win SBS 2k3 and use it as our dhcp server. I'mm not sure if there is a DHCP Client Table feature, I'll have to look around.