1748093 Members
5879 Online
108758 Solutions
New Discussion

ILO is not working

 
Sinju
New Member

ILO is not working

When I am trying to do some network settings some where ILO port got disabled now i cannot access the web access and server port LED also not blinking. If I restart the server ILO ip address is showing the same but i cannot ping the IP address.

Could anyone can help me out.

1 REPLY 1
Buddika2017
Occasional Contributor

Re: ILO is not working

Action Plan

*First of all, you need to check your end network configuration settings, So you can try direct connect to the ILO port using a network cable and if can't log please check  Your pc Ip address and subnet, Network cable faulty or not.still remaining 

*Update the latest firmware. still remaining 

*Reset the ILO using Intelligent Provisioning. 

*Still problem remaining please raise an HPE support case. 

Thank you,
Best Regards,
Buddika Sandaruwan