HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO is not working

 
Sinju
Occasional Visitor

ILO is not working

When I am trying to do some network settings some where ILO port got disabled now i cannot access the web access and server port LED also not blinking. If I restart the server ILO ip address is showing the same but i cannot ping the IP address.

Could anyone can help me out.

1 REPLY
Buddika2017
Occasional Contributor

Re: ILO is not working

Action Plan

*First of all, you need to check your end network configuration settings, So you can try direct connect to the ILO port using a network cable and if can't log please check  Your pc Ip address and subnet, Network cable faulty or not.still remaining 

*Update the latest firmware. still remaining 

*Reset the ILO using Intelligent Provisioning. 

*Still problem remaining please raise an HPE support case. 

Thank you,
Best Regards,
Buddika Sandaruwan