ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO missing while starting the server

 
HP DL 380
Occasional Visitor

ILO missing while starting the server

The option to get in to the ILO setup while starting the server is missing. I am using a HP DL 380 G4 server. Its not displaying the "Press F8 for Integrated Lights Out" option at all.
3 REPLIES
TarunJain
Respected Contributor

Re: ILO missing while starting the server

This option should come on DL380 G4.
Have you tried to reload the BIOS defaults?
TConn
Regular Advisor

Re: ILO missing while starting the server

You might try running a firmware update.

Also is the iLO card active?
Those who say it can not be done, should not interrupt those who are doing it.
Graeme Bray
Regular Advisor

Re: ILO missing while starting the server

The problem is that the iLo functionality has been disabled. You need to flip Switch #1 n the system maintenance switches to the ON position and reboot. The F8 prompt will appear. You need to go into iLo and set the Lights-Out functionality to enabled and then shut down and switch the switch back to Off.

This should fix your issue.