HPE Community
ProLiant Servers (ML,DL,SL)
1753868 Members
7190 Online
108809 Solutions
New Discussion

Re: ILO on HP ProLiant ML310e Gen8

 
ahmeda
Occasional Visitor

‎01-12-2016 05:55 AM

‎01-12-2016 05:55 AM

ILO on HP ProLiant ML310e Gen8

Hello,

How can I configure ILO  if ILO - interface is not installed on this server? (See attachment),

but the F8 iLO config option I can see iLO device.

Maybe I must to install another Ethernet network adapter?

Thenks.

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎01-12-2016 06:23 AM

‎01-12-2016 06:23 AM

Re: ILO on HP ProLiant ML310e Gen8

There is no dedicated ILO port, but the ILO chip is always there and functional. In ILO setup configure ILO to use the NIC1 in shared mode.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.