HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO on HP ProLiant ML310e Gen8

 
ahmeda
Occasional Visitor

ILO on HP ProLiant ML310e Gen8

Hello,

How can I configure ILO  if ILO - interface is not installed on this server? (See attachment),

but the F8 iLO config option I can see iLO device.

Maybe I must to install another Ethernet network adapter?

Thenks.

1 REPLY
Torsten.
Acclaimed Contributor

Re: ILO on HP ProLiant ML310e Gen8

There is no dedicated ILO port, but the ILO chip is always there and functional. In ILO setup configure ILO to use the NIC1 in shared mode.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!