ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO2 Integrated Remote Console : "unavailable already in use by a different client"

 
SOLVED
Go to solution
Davidoo
Occasional Advisor

ILO2 Integrated Remote Console : "unavailable already in use by a different client"

Hello
When i want to use the Integrated Remote Console, this message appears :

"
The Integrated Remote Console is unavailable, it is already in use by a different client"

Thanks for your support !
4 REPLIES
James ~ Happy Dude
Honored Contributor
Solution

Re: ILO2 Integrated Remote Console : "unavailable already in use by a different client"

Hello David,
If you want to force disconnect,
Login to Web-GUI of ILO.
Select Remote console TAB>Select Settings. There is a acquire option Enable the same.When it is in use by others you can force a disconnect.

Regards.
dms_1
Trusted Contributor

Re: ILO2 Integrated Remote Console : "unavailable already in use by a different client"

Hi,

you can try following:

1 Shutdown the server.
2 Unplug the power cable.
3 Discharge the fleepower by pressing and holding the power button for 5-8 secs.
4 Reconnect the power cable.
5 Restart the Server.

If no success - try updating firmware of the ILO2

Hope this helps
Davidoo
Occasional Advisor

Re: ILO2 Integrated Remote Console : "unavailable already in use by a different client"

That's all folk's !!
Thanks !
Jimmy Vance
HPE Pro

Re: ILO2 Integrated Remote Console : "unavailable already in use by a different client"

FOr iLO2 there are 2 easy ways to correct what your seeing. I normally see the error when something goes wrong using the java applet to access the remote console and it beilives a user is still connected when one actually isn't.

You can enable the aquire function

Under the tabs
Remote Console - Settings - Settings, click enable aquire

Under the System Status tab, you can go into diagnostics and there is a button to reset iLO2. No need to remove power from the system.

Another way that works on either iLO or iLO2 is to go into the network settings, change an option and set it back to the previous value, then click save, this will reset iLO / iLO2





__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!