ProLiant Servers (ML,DL,SL)
1748159 Members
3985 Online
108758 Solutions
New Discussion юеВ

Re: ILO2 Remote console problem

 
Walid Tabar
New Member

ILO2 Remote console problem

ILO2 remote console does not work on an HP DL380G5 server with SCO unix installed. I get a blank screen.
Please anyone, help!
3 REPLIES 3
Taha Tungekar
Frequent Advisor

Re: ILO2 Remote console problem

Which remote console are you using? The Integrated Remote Console or the Classic Remote Console (with Java)?

Try the classic Remote Console (with Java). That might help.

-Taha Tungekar
Walid Tabar
New Member

Re: ILO2 Remote console problem

Thank you for your reply. I have the same problem on both consoles!
Jim Miller
Frequent Advisor

Re: ILO2 Remote console problem

I'm not a *nix guy, but I had the same problem on a pre-canned anti virus server image that ran on Linux. I installed this software on a DL360 G5. The iLO2 worked, but the console was blank. The problem was that the Linux was not recognizing the iLO2 keyboard. I found that the hid (human interface device)module was not being loaded. By manually executing ├в modprobe hid├в at the root prompt, the iLO2 keyboard began to work.

To make the hid module load after a restart, I added the line "modprobe hid" to \etc\rc.d\rc.local