ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO2 Remote console problem

Walid Tabar
Occasional Visitor

ILO2 Remote console problem

ILO2 remote console does not work on an HP DL380G5 server with SCO unix installed. I get a blank screen.
Please anyone, help!
3 REPLIES
Taha Tungekar
Frequent Advisor

Re: ILO2 Remote console problem

Which remote console are you using? The Integrated Remote Console or the Classic Remote Console (with Java)?

Try the classic Remote Console (with Java). That might help.

-Taha Tungekar
Walid Tabar
Occasional Visitor

Re: ILO2 Remote console problem

Thank you for your reply. I have the same problem on both consoles!
Jim Miller
Frequent Advisor

Re: ILO2 Remote console problem

I'm not a *nix guy, but I had the same problem on a pre-canned anti virus server image that ran on Linux. I installed this software on a DL360 G5. The iLO2 worked, but the console was blank. The problem was that the Linux was not recognizing the iLO2 keyboard. I found that the hid (human interface device)module was not being loaded. By manually executing â modprobe hidâ at the root prompt, the iLO2 keyboard began to work.

To make the hid module load after a restart, I added the line "modprobe hid" to \etc\rc.d\rc.local