ILO2??

[panunzi]

HELLO
it s my first installation with HP
proliant DL380G6 and DL360G6
my office is far from these servers so i think ILO2 is the only way to check the hardware..it's correct?
i'm not sure how can i check hard drive status?
Thanks

[gregersenj]

If you have installed the insight agents, then use the System Management Homepage.

You can browse it from you desk.

Have you considered to use remote support / HP SIM?

BR
/jag

[panunzi]

Thanks for you answer
i'm downolading the HP SIM 6 version

at the moment i ve installed on my proliant
the proliant Onboard administrator,
the system management homepage

it is necessary to install on the proliant anything else to use the hp sim6?
thanks

[cnb]

Install the Proliant Support Pack which will have most of the agents you'll want to have installed.

If you want complete Lights-Out remote control you'll use the iLO-2 and the associated drivers.

Start here for your DL380 G6 to choose your OS and then look for the Support Pack and drivers:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3884083〈=en&cc=us&prodTypeId=15351&prodSeriesId=3884082&taskId=135

DL360 G6:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3884320〈=en&cc=us&taskId=135&prodTypeId=15351&prodSeriesId=3884319

Rgds,