cancel
Showing results for 
Search instead for 
Did you mean: 

ILO2??

 
panunzi
Occasional Visitor

ILO2??

HELLO
it s my first installation with HP
proliant DL380G6 and DL360G6
my office is far from these servers so i think ILO2 is the only way to check the hardware..it's correct?
i'm not sure how can i check hard drive status?
Thanks
3 REPLIES
gregersenj
Honored Contributor

Re: ILO2??

If you have installed the insight agents, then use the System Management Homepage.

You can browse it from you desk.

Have you considered to use remote support / HP SIM?

BR
/jag
panunzi
Occasional Visitor

Re: ILO2??

Thanks for you answer
i'm downolading the HP SIM 6 version

at the moment i ve installed on my proliant
the proliant Onboard administrator,
the system management homepage

it is necessary to install on the proliant anything else to use the hp sim6?
thanks
cnb
Honored Contributor

Re: ILO2??

Install the Proliant Support Pack which will have most of the agents you'll want to have installed.

If you want complete Lights-Out remote control you'll use the iLO-2 and the associated drivers.

Start here for your DL380 G6 to choose your OS and then look for the Support Pack and drivers:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3884083〈=en&cc=us&prodTypeId=15351&prodSeriesId=3884082&taskId=135

DL360 G6:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3884320〈=en&cc=us&taskId=135&prodTypeId=15351&prodSeriesId=3884319

Rgds,