ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO4 will not update (from 2.0)

 
ICS_CS
Occasional Advisor

ILO4 will not update (from 2.0)

HP ProLiant ML350p Gen8. ILO4 is version 2.0. I'm trying to update it to 2.61.

If I do it through the local Windows install, it sits at "The installation is being performed...." for a good 45 minutes, then quits with an error along the lines of "upload failed".

If I do it through the ILO interface itself, the upload is incredibly slow, and times out after 12% or so.

One possibly relevant thing to note (and the reason we are trying to updated it) is that the ILO is very very sluggish. The web interface is abnormally slow to respond and even simple SNMP requests to it frequently time out. We of course tried a complete factory reset (no change).

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: ILO4 will not update (from 2.0)

First I would try to pull the power plugs, then look into the ILO diagnostics page - all green?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
slavtechbuer
Valued Contributor

Re: ILO4 will not update (from 2.0)

Hi there..

I came across simillar issue with ILO3, for some reason upgrade hangs all the time. I have done through Mozilla Firefox. 

I don't know why, but did work to me. 

Regards

Slav