INSPECT File

[Benoit TOURRET_1]

Hello, I want to use the Inspect funtion in the BIOS of the Proliant Servers.
It works fine on the DL350, DL380, DL585 but the F10 key (System Partition Utility) doesn't
work on the ML570.

What is the way to have this feature on all the new Proliant ???

Thanks,
Benoît

[Tv_3]

You have to install the system partition utility by using the CDset that was being shipped originaly with your server.

Boot from it and instal the partition.


Sincerly Regards.

[Oleg Koroz]

There is no need to install F10 partition in newer servers
Older server used System Configuration Utility that stores all settings info and use 36MB space of your HDD
Newer Server they keep all settings / resources in the actual BIOS F9
Latest system configuration Utility was SP19619 and going back in years
Newer hardware and resources capabilities can't be handled by older system partition and there might be no send to try installing SCU to HDD

Use instead
http://h18023.www1.hp.com/support/files/server/us/download/22390.html (in manual mode)
and
http://h18023.www1.hp.com/support/files/server/us/download/18396.html where possibly

[Benoit TOURRET_1]

Hello, Thanks for the answer,

In facts, A big custommer wants me to produce the INSPECT file for each Server.
this file is produced by the "ROM-Based Inspect Utility, Version 2.20"

Up to now, what are the Proliant models that have this utility ?

I Checked the SP23552.exe program on a ProLiant ML350 G3, It works fine.

Thanks a lot.

[Benoit TOURRET_1]

No more answer, I close the thread.