ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

INTERMODULE BUS ERROR

Ogunyemi Kayode
Occasional Visitor

INTERMODULE BUS ERROR

i'm having a problem with my ML370 server, during
start up , i get SCSI BIOS NOT INSTALLED ERROR
but the server still boots up, and server ok.
but at times ,i get this INTERMODULE BUS ERROR
during startup, which get the server stocked at that stage.
Also, its hangs up!!! What can be done to solve this problem.
1 REPLY
Rajashekar Chintakunta
Honored Contributor

Re: INTERMODULE BUS ERROR

Hi Ogunyemi,

Following ADVISORY talks about a similar issue on a ML570 G2:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EL030108_CW01

I would advice you to upgrade the firmware of the Server BIOS and the Controller Card BIOS and the issue should be taken care.

You could use Firmware Maintenance CD to upgrade all the components firmware on the server:
http://h18007.www1.hp.com/support/files/server/us/download/25831.html

Regards,
Raj.