IPM received a management processor error message

[Chris Coates_1]

SIM has this error repeating from a couple servers.

In the error message it also says:

Insight Power Manager received an error message from the system`s management processor

"iLO Error Response: 1 (Syntax error)" or "iLO Error Response: 75 (No data available)"

Can anyone tell me the cause of these errors so I can fix the issue and eliminate the error messages in SIM

Thanks

Chris

[phil gaisford]

iLO prepares power samples every 5 minutes. If IPM polls iLO for its power history before iLO has been up long enough to prepare at least one sample, you will get the result observed above. If the condition persists with a particular server, then likely iLO has a problem and is restarting very often. Check the iLO2 log perhaps?