ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

IPMI/DCMI over LAN in iLO 5

 
KarolisS
Occasional Contributor

IPMI/DCMI over LAN in iLO 5

Hello,

HPE Gen10 servers by default comes with iLO5 setting "IPMI/DCMI over LAN" disabled. 

is there any way to enable this setting via powershell HPiLOCmdlets?

 

3 REPLIES
GokulKS
Trusted Contributor

Re: IPMI/DCMI over LAN in iLO 5

Hi,

Current verison of our HPE iLOCmdlets (1.5.0.0) does not support Gen 10 servers but the new version 2.0 which is under development is going to support Gen 10 by end of Q1 CY18.

Thanks,

Gokul

HPE PowerShell Team

Don't forget to give Kudos if the problem got resolved or like suggestion.
GokulKS
Trusted Contributor

Re: IPMI/DCMI over LAN in iLO 5

Hi,

Additionally we have HPERedfish cmdlets which are available on PowerShell Gallery website which can be used for changing IPMI/DCMI settings of iLO but these cmdlets are provider cmdlets and you need to code little bit to get\set changes on target iLO. Samples are also available for your reference.

Alternatively you can still use HPE iLO 1.5 cmdlets for Gen 10 for time being with caveat its not supported platform from us and any issues you need handle on your own till it's officially supported by us.

Thanks,

Gokul

Don't forget to give Kudos if the problem got resolved or like suggestion.
KarolisS
Occasional Contributor

Re: IPMI/DCMI over LAN in iLO 5

HPE iLOCmdlets version 2.0 with Gen10 support is realeased already, but i could not figure out how to enable IPMI/DCMI over LAN wtih new iLOCmdlets . Can you help on this?