IPMI on HP Proliant DL360 Gen9

[Ankit11]

Hi, 

I am trying to get sensor data via IPMI, when I am trying to connect to the machine I am getting below error.

$ ipmitool -H my_server_ip -I lanplus -U user -P password sensor list

Error: Unable to establish IPMI v2 / RMCP+ session
Get Device ID command failed
Unable to open SDR for reading

I have enabled the IPMI from iLO4 settings on port 623, frimware version is 2.50

Please help where I am doing wrong, did I miss any configuration. I am a newbie.

Thanks in advance!

[Suporte-UNISIM]

Hi there!

I have the same problem with DL360 Gen10.

Did you solve your problem? Could you share the solution with me?

Thanks